济南伸缩蓬伸缩臂的原理
伸缩棚伸缩臂的原理主要基于液压系统驱动和结构设计实现伸缩功能,具体可分为以下四点:
The principle of the telescopic arm of the telescopic shed is mainly based on the hydraulic system drive and structural design to achieve the telescopic function, which can be divided into the following four points:
液压系统驱动
Hydraulic system drive
通过液压泵向液压缸输送高压液体,驱动伸缩臂的伸缩运动。液压系统具有稳定可靠、承载力强、控制精准的特点,能满足不同工况需求。
High pressure liquid is delivered to the hydraulic cylinder through a hydraulic pump to drive the telescopic movement of the telescopic arm. The hydraulic system has the characteristics of stability, reliability, strong load-bearing capacity, and precise control, which can meet the needs of different working conditions.
伸缩结构设计
Expansion structure design
采用多节式结构(如五节主臂),每节通过铰链或销孔连接,实现逐节伸缩。
Adopting a multi section structure (such as a five section main arm), each section is connected by hinges or pin holes to achieve section by section expansion and contraction.
缩回时通过内置弹簧和互锁机构锁定各节连接,确保稳定性;伸长时液压缸推动活塞杆带动臂体伸展。
When retracted, the connections of each section are locked by built-in springs and interlocking mechanisms to ensure stability; When extending, the hydraulic cylinder pushes the piston rod to extend the arm body.
传感器与控制系统
Sensors and Control Systems
配备传感器实时监测伸缩臂长度、承载力等参数,并通过控制系统调节液压系统压力和流量,实现精准控制。
Equipped with sensors to monitor real-time parameters such as the length and load-bearing capacity of the telescopic arm, and adjust the hydraulic system pressure and flow rate through the control system to achieve precise control.
应用场景适配
Application scenario adaptation
适用于货物装卸、建筑施工等领域,通过调整液压系统压力和伸缩结构组合,满足不同臂长需求。
Suitable for fields such as cargo loading and unloading, construction, etc., it can meet different arm length requirements by adjusting hydraulic system pressure and combining telescopic structures.
伸缩棚电动伸缩臂电机功率多大?
What is the power of the electric telescopic arm motor for the telescopic shed?
伸缩棚电动伸缩臂电机的功率范围根据型号和定制需求有所不同,具体参数如下:
The power range of the electric telescopic arm motor for the telescopic shed varies depending on the model and customization requirements. The specific parameters are as follows:
功率范围
power range
电动伸缩雨棚电机功率通常在 0.01-40W 之间,具体数值需根据推杆直径、行程长度等参数定制。
The power of the electric retractable canopy motor is usually between 0.01-40W, and the specific value needs to be customized according to parameters such as push rod diameter and stroke length.
其他关键参数
Other key parameters
电压 :常见为 3V-24VDC ,部分高端型号支持更高电压。
Voltage: Commonly ranging from 3V-24VDC, some high-end models support higher voltages.
转速 :输出转速范围为 5-2000rpm ,减速比可达 5-1500 。
Speed: The output speed range is 5-2000rpm, and the reduction ratio can reach 5-1500.
应用场景 :适用于直径 3.4mm-38mm 的伸缩推杆,行程和推力等参数也可按需定制。
Application scenario: Suitable for telescopic push rods with diameters ranging from 3.4mm to 38mm, and parameters such as stroke and thrust can also be customized as needed.
建议根据实际使用需求(如推重、行程长度)联系厂家进行详细参数匹配与定制。
It is recommended to contact the manufacturer for detailed parameter matching and customization based on actual usage needs, such as thrust and travel length.
本文由 济南伸缩蓬 友情奉献.更多有关的知识请点击 / 真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.
This article is a friendly contribution from Jinan retractable tent For more related knowledge, please click / Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.
阅读/ Recommended reading
- 济南遮阳蓬什么材料耐用? 2025-11-19
- 济南伸缩棚:为你遮阳挡雨,有它就够了 2025-11-17
- 济南停车棚主体部分为专用异型钢结构,顶棚为高强度、使用寿命长的膜材料制作而成 2025-11-14
- 济南雨棚:聚碳酸酯板材搭建的伸缩篷太给力了 2025-10-30
伸缩棚伸缩臂的原理主要基于液压系统驱动和结构设计实现伸缩功能,具体可分为以下四点: The principle of the telescopic arm of the te...
